Access shared resources simultaneously from different threads. More...

Data Structures
struct	osSemaphoreAttr_t
	Attributes structure for semaphore. More...

Typedefs
typedef void *	osSemaphoreId_t

Functions
osSemaphoreId_t	osSemaphoreNew (uint32_t max_count, uint32_t initial_count, const osSemaphoreAttr_t *attr)
	Create and Initialize a Semaphore object. More...

const char *	osSemaphoreGetName (osSemaphoreId_t semaphore_id)
	Get name of a Semaphore object. More...

osStatus_t	osSemaphoreAcquire (osSemaphoreId_t semaphore_id, uint32_t timeout)
	Acquire a Semaphore token or timeout if no tokens are available. More...

osStatus_t	osSemaphoreRelease (osSemaphoreId_t semaphore_id)
	Release a Semaphore token up to the initial maximum count. More...

uint32_t	osSemaphoreGetCount (osSemaphoreId_t semaphore_id)
	Get current Semaphore token count. More...

osStatus_t	osSemaphoreDelete (osSemaphoreId_t semaphore_id)
	Delete a Semaphore object. More...

Description

Semaphores are used to manage and protect access to shared resources. Semaphores are very similar to Mutexes. Whereas a Mutex permits just one thread to access a shared resource at a time, a semaphore can be used to permit a fixed number of threads/ISRs to access a pool of shared resources. Using semaphores, access to a group of identical peripherals can be managed (for example multiple DMA channels).

CMSIS-RTOS Semaphore

A semaphore object should be initialized to the maximum number of available tokens. This number of available resources is specified as parameter of the osSemaphoreNew function. Each time a semaphore token is obtained with osSemaphoreAcquire (in available state), the semaphore count is decremented. When the semaphore count is 0 (i.e. depleted state), no more semaphore tokens can be obtained. The thread/ISR that tries to obtain the semaphore token needs to wait until the next token is free. Semaphores are released with osSemaphoreRelease incrementing the semaphore count.

CMSIS-RTOS Semaphore States

Note: The functions osSemaphoreAcquire, osSemaphoreGetCount, and osSemaphoreRelease can be called from Interrupt Service Routines.; Refer to Semaphore Configuration for RTX5 configuration options.

Semaphore Use Cases

Due to their flexibility, semaphores cover a wide range of synchronizing applications. At the same time, they are perhaps the most challenging RTOS object to understand. The following explains a use case for semaphores, taken from the book The Little Book Of Semaphores by Allen B. Downey which is available for free download.

Non-binary Semaphore (Multiplex)

A multiplex limits the number of threads that can access a critical section of code. For example, this could be a function accessing DMA resources which can only support a limited number of calls.

To allow multiple threads to run the function, initialize a semaphore to the maximum number of threads that can be allowed. The number of tokens in the semaphore represents the number of additional threads that may enter. If this number is zero, then the next thread trying to access the function will have to wait until one of the other threads exits and releases its token. When all threads have exited the token number is back to n. The following example shows the code for one of the threads that might access the resource:

osSemaphoreId_t multiplex_id;
 
void thread_n (void)
{
  multiplex_id = osSemaphoreNew(3, 3, NULL);
  while(1)
    {
      osSemaphoreAcquire(multiplex_id, osWaitForever);
      // do something
      osSemaphoreRelease(multiplex_id);
    }
}

Producer/Consumer Semaphore

The producer-consumer problem can be solved using two semaphores.

A first semaphore (empty_id) counts down the available (empty) buffers, i.e. the producer thread can wait for available buffer slots by acquiring from this one.

A second semaphore (filled_id) counts up the used (filled) buffers, i.e. the consumer thread can wait for available data by acquiring from this one.

It is crucial for the correct behaviour that the threads acquire and release on both semaphores in the given sequence. According to this example one can have multiple producer and/or consumer threads running concurrently.

#define BUFFER_SIZE 10
osSemaphoreId_t empty_id = osSemaphoreNew(BUFFER_SIZE, BUFFER_SIZE, NULL);
osSemaphoreId_t filled_id = osSemaphoreNew(BUFFER_SIZE, 0, NULL);
void producer_thread (void)
{
  while(1)
  {
    osSemaphoreAcquire(empty_id, osWaitForever);
    // produce data
    osSemaphoreRelease(filled_id);
  }
}
void consumer_thread (void)
{
  while(1)
  {
    osSemaphoreAcquire(filled_id, osWaitForever);
    // consume data
    osSemaphoreRelease(empty_id);
  }
}

Data Structure Documentation

struct osSemaphoreAttr_t

Attributes to configure a semaphore.

Refer to Memory Management for details about usage of

Data Fields
const char *	name	name of the semaphore Pointer to a string with a human readable name of the semaphore object. Default: NULL.
uint32_t	attr_bits	attribute bits Reserved for future use (set to '0'). Default: 0.
void *	cb_mem	memory for control block Pointer to a memory location for the semaphore control block object. This can optionally be used for custom memory management systems. Default: NULL (uses kernel memory management).
uint32_t	cb_size	size of provided memory for control block The size of the memory block passed with cb_mem. Must be the size of a semaphore control block object or larger.

Typedef Documentation

osSemaphoreId_t

Semaphore ID identifies the semaphore.

Returned by:

osSemaphoreNew

Function Documentation

osSemaphoreId_t osSemaphoreNew	(	uint32_t	max_count,
		uint32_t	initial_count,
		const osSemaphoreAttr_t *	attr
	)

Parameters

[in]	max_count	maximum number of available tokens.
[in]	initial_count	initial number of available tokens.
[in]	attr	semaphore attributes; NULL: default values.

Returns: semaphore ID for reference by other functions or NULL in case of error.

The function osSemaphoreNew creates and initializes a semaphore object that is used to manage access to shared resources and returns the pointer to the semaphore object identifier or NULL in case of an error. It can be safely called before the RTOS is started (call to osKernelStart), but not before it is initialized (call to osKernelInitialize).

The parameter max_count specifies the maximum number of available tokens. A max_count value of 1 creates a binary semaphore.

The parameter initial_count sets the initial number of available tokens.

The parameter attr specifies additional semaphore attributes. Default attributes will be used if set to NULL.

Note: This function cannot be called from Interrupt Service Routines.

Code Example

#include "cmsis_os2.h"                                     // CMSIS RTOS header file
 
void Thread_Semaphore (void *argument);                    // thread function
osThreadId_t tid_Thread_Semaphore;                         // thread id
 
osSemaphoreId_t sid_Thread_Semaphore;                      // semaphore id
 
int Init_Semaphore (void)
{
 
  sid_Thread_Semaphore = osSemaphoreNew(2, 2, NULL);
  if (!sid_Thread_Semaphore) {
    ; // Semaphore object not created, handle failure
  }
 
  tid_Thread_Semaphore = osThreadNew (Thread_Semaphore, NULL, NULL);
  if (!tid_Thread_Semaphore) {
    return(-1);
  }
 
  return(0);
}
  
void Thread_Semaphore (void *argument)
{
  osStatus_t val;
 
  while (1) {
    ; // Insert thread code here...
 
    val = osSemaphoreAcquire (sid_Thread_Semaphore, 10);   // wait for max. 10 ticks for semaphore token to get available
    switch (val) {
    case osOK:
      ; // Use protected code here...
      osSemaphoreRelease (sid_Thread_Semaphore);           // Return a token back to a semaphore
      break;
    case osErrorResource:
      break;
    case osErrorParameter:
      break;
    default:
      break;
    }
 
    osThreadYield ();                                      // suspend thread
  }
}

const char * osSemaphoreGetName ( osSemaphoreId_t semaphore_id )

Parameters

[in] semaphore_id semaphore ID obtained by osSemaphoreNew.

Returns: name as NULL terminated string.

The function osSemaphoreGetName returns the pointer to the name string of the semaphore identified by parameter semaphore_id or NULL in case of an error.

Note: This function cannot be called from Interrupt Service Routines.

osStatus_t osSemaphoreAcquire	(	osSemaphoreId_t	semaphore_id,
		uint32_t	timeout
	)

Parameters

[in]	semaphore_id	semaphore ID obtained by osSemaphoreNew.
[in]	timeout	Timeout Value or 0 in case of no time-out.

Returns: status code that indicates the execution status of the function.

The blocking function osSemaphoreAcquire waits until a token of the semaphore object specified by parameter semaphore_id becomes available. If a token is available, the function instantly returns and decrements the token count.

The parameter timeout specifies how long the system waits to acquire the token. While the system waits, the thread that is calling this function is put into the BLOCKED state. The parameter timeout can have the following values:

when timeout is 0, the function returns instantly (i.e. try semantics).
when timeout is set to osWaitForever the function will wait for an infinite time until the semaphore becomes available (i.e. wait semantics).
all other values specify a time in kernel ticks for a timeout (i.e. timed-wait semantics).

Possible osStatus_t return values:

osOK: the token has been obtained.
osErrorTimeout: the token could not be obtained in the given time.
osErrorResource: the token could not be obtained when no timeout was specified.
osErrorParameter: the parameter semaphore_id is incorrect.

Note: May be called from Interrupt Service Routines if the parameter timeout is set to 0.

Code Example

Refer to osSemaphoreNew.

osStatus_t osSemaphoreRelease ( osSemaphoreId_t semaphore_id )

Parameters

[in] semaphore_id semaphore ID obtained by osSemaphoreNew.

Returns: status code that indicates the execution status of the function.

The function osSemaphoreRelease releases a token of the semaphore object specified by parameter semaphore_id. Tokens can only be released up to the maximum count specified at creation time, see osSemaphoreNew. Other threads that currently wait for a token of this semaphore object will be put into the READY state.

Possible osStatus_t return values:

osOK: the token has been correctly released and the count increased.
osErrorResource: the maximum token count has been reached.
osErrorParameter: the parameter semaphore_id is incorrect.

Note: This function may be called from Interrupt Service Routines.

Code Example

Refer to osSemaphoreNew.

uint32_t osSemaphoreGetCount ( osSemaphoreId_t semaphore_id )

Parameters

[in] semaphore_id semaphore ID obtained by osSemaphoreNew.

Returns: number of tokens available.

The function osSemaphoreGetCount returns the number of available tokens of the semaphore object specified by parameter semaphore_id. In case of an error it returns 0.

Note: This function may be called from Interrupt Service Routines.

osStatus_t osSemaphoreDelete ( osSemaphoreId_t semaphore_id )

Parameters

[in] semaphore_id semaphore ID obtained by osSemaphoreNew.

Returns: status code that indicates the execution status of the function.

The function osSemaphoreDelete deletes a semaphore object specified by parameter semaphore_id. It releases internal memory obtained for semaphore handling. After this call, the semaphore_id is no longer valid and cannot be used. The semaphore may be created again using the function osSemaphoreNew.

Possible osStatus_t return values:

osOK: the semaphore object has been deleted.
osErrorParameter: the parameter semaphore_id is NULL or invalid.
osErrorResource: the semaphore specified by parameter semaphore_id is in an invalid semaphore state.
osErrorISR: osSemaphoreDelete cannot be called from interrupt service routines.

Note: This function cannot be called from Interrupt Service Routines.

Data Structures

Typedefs

Functions

Description

Semaphore Use Cases

Data Structure Documentation

Typedef Documentation

Function Documentation