Using the 2GBP
----------------------

1. open a terminal window

2. cd linuxcnc/configs/2gbp8

3. run: linuxcnc 2gbp8.ini

4. turn on box power

5. home all axes

6. use syringe adjust retract/depress buttons to align extruder

7. load g-code file with File->Open or the file folder icon

8. if electrospinning, set syringe spinning rate and press HV Armed

9. press the -> (play) button to run g-code program

NOTE - IF HV VOLTAGE READS OVER 0.8, HV IS PRESENT!


Programming
-----------------------
To extrude (3d print) at 0.1uL/mm rate:

	S0.1
	M3

To stop extruding

	M5

To electrospin at 0.01mL/hr rate for 10min:

	M68 E1 Q0.01
	M68 E0 Q2
	G4 P600

To stop electrospinning:

	M68 E0 Q0