Using the 2GBP
----------------------

1. double-click the 2gbp11a launcher icon on desktop

2. turn on box power

3. Press red X and red ON icons

3. home all axes

4. use syringe adjust retract/depress buttons to align extruder

5. lower needle to just clear build surface (slide paper between needle and surface). Press touch off, select G55 coordinate system, and ok. Then repeat touch off for X and Y.

6. load g-code file with File->Open or the file folder icon

7. press HV Arm to enable high voltage

8. press the -> (play) button to run g-code program

NOTE - If HV ON button is lit, assume high voltage on build plate.


Programming
-----------------------
To extrude (3d print) at 0.1uL/mm rate:

	S0.1
	M3

To stop extruding

	M5

To electrospin at 0.01mL/hr rate for 10min:

	M68 E1 Q0.01
	M68 E0 Q2
	G4 P600

To stop electrospinning:

	M68 E0 Q0